ARIEL

Texture : 2
Lustre : 1,3
Transparency : 1

Flextex is a cost effective impact and chemical resistant cladding material making it ideal for wall protection in high traffic areas. Flextex is:
* Group 1 fire rated
* bleach cleanable
* able to be cut with a Stanley knife or standard wood working tools
* available in flat sheet or textured patterns
* available in 40+ standard colours and 35+ standard designs to mix and match for 1000+ combinations
* manufactured in an ISO9001/14001 facility which maintains high product standards

product-specs
Description / Features Flextex is a cost effective impact and chemical resistant cladding material making it ideal for wall protection in high traffic areas. Flextex is:
* Group 1 fire rated
* bleach cleanable
* able to be cut with a Stanley knife or standard wood working tools
* available in flat sheet or textured patterns
* available in 40+ standard colours and 25+ standard designs to mix and match for 1000+ combinations
* manufactured in an ISO9001/14001 facility which maintains high product standards
How to specify 1. Design name
2. Colour
Only available in Sheet Size 2440mm x 1220mm x 1mm Design runs vertically only
Composition 3 dimensional 1mm thermoplastic
Finishes Available View the colour range hereor download the FlexTex Colour Range pdf from the DOWNLOAD tab.
Sheet Size 2440mm x 1220mm
Weight 2kg/m²
Indoor/Outdoor Indoor only
Wet Areas Yes
Suggested Installation Adhered to substrate using either a neutral cure silicone or non-solvent based contact adhesive.
DO NOT USE SOLVENT BASED CONTACT ADHESIVES.
Go to the DOWNLOAD tab for more details in the Baresque FlexTex Handling, Fabrication and Installation Guide and Baresque FlexTex Trim Range.
Lead Time 5 weeks (approx) from Wednesday + 1 week for Western Australia. Express delivery is available subject to a surcharge. Contact Baresque for details and pricing.
Customisable Colour - 80 sheet minimum
Design - subject to set up fees
Contact your nearest Baresque office for details
Thermoformable Yes. Cold formable to tight radii
Fire In accordance with AS/NZS 3837
Classification - Group 1. Due to the high Specific Extinction result, SPRINKLERS MUST BE USED when using this product as a wall or ceiling lining
Specific Extinction - Greater than 250m²/kg
Additional Comments Some panelling effect is an inherent characteristic of FlexTex products. This design comes with BIO (Built In Overlap) join which delivers a less noticeable seam.
Do not expose FlexTex to heat greater than 60 degrees C.
Additional Technical and Stain Resistance Properties can be found on the DOWNLOAD tab.
Fabrication Standard wood-working tools. Go to the DOWNLOAD tab for more details in the Baresque FlexTex Handling, Fabrication and Installation Guide.
Refinishable No
Pattern Repeat The Weave emboss runs parallel to the 2440mm side of the panel
Care Instruction Always use a clean, white, soft cloth.

Use the cloth with any of the following in preferred order of use:

* Clear warm water

* Mild solution of liquid detergent and warm water

* Isopropyl Alcohol (a.k.a. rubbing alcohol)

* Bleach solution (1 bleach : 4 water) - EXCLUDING Wood Grains, Mirrors and Brushed Copper

Do not use abrasive cleaning agents, lacquer thinners or nail polish remover as these may cause discolouration over a period of time.

Remove any cleaner with a clean, damp cloth. Gently pat dry.

A short stiff bristled brush can be used to remove dirt or grease from texture valleys.

Always test in an inconspicuous area first. If care instructions don't deliver the expected results, cease cleaning method immediately and contact Baresque for assistance.
Environmental Information FlexTex is manufactured in an ISO 9001:2008 certified plant where there is a commitment to:

* maintaining a healthy work environment for its employees and to protecting the community in which it operates

* conducting operations in compliance with all applicable environmental laws and regulations as well as other requirements

* Continual review and improvement of established targets and objectives through a life-cycle approach to manufacturing and quality product design

* Prevent pollution and minimize waste
Product specification Download >
Baresque FlexTex Colour Range Download >
Baresque FlexTex Handling Fabrication & Installation Guide Download >
Baresque FlexTex Technical and Stain Resistance Properties Download >
Baresque FlexTex Trim Range Download >