LIGHTBLOCKS BOARD – COLOURS

Fully refinishable resin with soft touch available in a range of thicknesses
FEATURES
* Bleach cleanable
* Fully refinishable
* Finger print proof
* Soft touch
* Thermoformable
* Seamless Joins
* Unique Depth

Select Colour Below To Request Sample*
Clear
    SKU: N/A Categories: , Brand:
    product-specs
    Description / Features Fully refinishable resin with soft touch available in a range of thicknesses
    FEATURES
    * Bleach cleanable
    * Fully refinishable
    * Finger print proof
    * Soft touch
    * Thermoformable
    * Seamless Joins
    * Unique Depth
    Brand Spec Lightblocks
    How to specify 1. Colour
    2. Sheet size
    3. Thickness
    4. Backing - Unbacked, 1mm clear PVC or Protective Paint
    Composition Lightblocks resin. Lightblocks Board Colours can be backed in 1mm clear pvc for installation where the back of panel is exposed or where seamless joins are required (not thermoformable) or back protective paint - for installation where thermorformed seamless joins are required
    Pattern Repeat N/A
    Weight 1kg/m² per mm thickness
    Sheet Size 2440mm x 1220mm - 3mm, 6mm, 10mm, 15mm, 20mm, 30mm
    3000mm x 1000mm - 3mm, 6mm, 10mm
    Finishes Available Matt
    Indoor/Outdoor Indoor use only
    Wet Areas Yes
    Customisable Yes.
    Thermoformable Yes
    Lead Time 1 week production time plus delivery (up to 10 sheets).
    Sydney, Melbourne, Brisbane - 3 working days,
    Adelaide - 4 working days,
    Perth - 5 working days.

    Plus 1 week to add Seraphic Digital Print.
    Additional Comments If Lightblocks Board is being fabricated into drop down edges or carved into for signage, a protective layer can be added to the back of the panel at an additional cost.
    Fabrication Standard wood-working tools. See Baresque Lightblocks Handling, Fabrication and Installation Guide for more details.
    Suggested Installation Lightblocks Board Colours should be ordered as:
    - BACKED 1mm pvc clear - for installations where the back of panel is exposed or where seamless joins are required (not thermoformable)
    - BACKED Protective Paint - for installation where thermorformed seamless joins are required.
    An expansion gap of 1mm per 1 meter of product should be allowed for when setting out your sheets. Adhered to substrate using either a neutral cure silicone or non-solvent based contact adhesive. DO NOT USE SOLVENT BASED CONTACT ADHESIVES. See Baresque Lightblocks Handling, Fabrication and Installation Guide for more details.
    Refinishable Fully refinishable
    Care InstructionAlways use a clean, white, soft cloth. When cleaning, never scrub LIGHTBLOCKS. Gently wipe the surface.

    Use cloth with any of the following in preferred order of use:
    * Clear warm water
    * Mild solution of liquid detergent and warm water
    * Kerosene, hexane, or aliphatic naphtha, or any acrylic cleaner, such as Novus. Always follow manufacturer's recommended use and safety procedures.

    Remove any oily residue left behind from solvent cleaning with detergent and water.

    For more difficult stains, dampen a soft white cloth with a solution of household bleach (10% bleach / 90% water). Rub gently. Rinse with a water dampened cloth to remove bleach concentration.

    DO NOT USE glass cleaning products, acetone, gasoline, benzene, lacquer thinner, chlorinated solvents, gritty abrasive scouring compounds, or alkaline cleaners to clean Lightblocks as damage to the sheet will occur.

    DO NOT USE squeegee, scraper, or synthetic rags that may scratch LIGHTBLOCKS.

    REFINISHING
    * Light refinishing - if there is only a light scratch, refinishing can be achieved by using rubbing the area in a random circular motion with a fine steel scouring pad (Scotch-brite). Test in an inconspicuous area before attempting a main area on the job.
    Environmental InformationLightblocks panels are easily recycled. Contact your nearest Baresque branch for details.
    Product specificationDownload >
    Baresque Architectural Finishes Fixing SuggestionsDownload >
    Baresque Lightblocks Board Chemical Resistance GuideDownload >
    Baresque Lightblocks Board Handling Fabrication Installation GuideDownload >
    Baresque Lightblocks Board Panel Joins GuideDownload >
    Baresque Lightblocks Ply - Edge DetailsDownload >
    Baresque Lightblocks Seamless Join GuideDownload >