Cork Damask Antares

Swinging between warm and cold atmospheres but always creating a very contemporary look, Antares is the latest collection of cork from Omexco. Offering a smart choice of textured motifs and damask designs that intertwine with matching plains, all Antares designs are printed onto organic cork which provides an irresistible weathered charm.

91cm wide - Available by the lineal metre

Printed Cork. 269g/m²

Tested in accordance with AS ISO 9705 2003 for the purpose of determining the Group Number classification as required by the Building Code of
Australia for the control of fire spread on interior wall and ceiling linings.

The result achieved was:
Classification - Group 2
Specific Extinction - Less than 250m²/kg

2-year warranty. Visit baresque.com.au/warranty for complete details.

• 2-weeks (approx.) from Wednesday, subject to stock availability.

• Additional 1-week for Western Australia.

• Express delivery is available subject to a surcharge. Contact Baresque for details and pricing.

Non-reverse hang / butt join.

Cork needs to be installed with care using a rubber roller (not a brush or a plastic pallet) so that loose corners/edges remain limited, even and barely visible.

To remove irregularities glue loose parts onto the backing with a small amount of non-staining cellulose adhesive.

Baresque recommends and supply Roman brand adhesives and primers.

Always use a clean, white, soft cloth.

Remove liquid stains immediately using a dry cloth. Avoid hard scrubbing.

For tougher stains, dampen the cloth with warm water or a weak dilution of liquid detergent and apply being careful not to soak the material. Always work towards the centre of the stain so as to avoid further spreading.

Remove any detergent with a clean, damp cloth. Gently pat dry.

Always test in an inconspicuous area first.

Some slight "lifting" of the cork is an inherent and unavoidable characteristic of this product. Loose parts may be glued onto the backing with a little bit of non-staining cellulose adhesive.