Texture : 2
Lustre : 2
Transparency : 1

This casually elegant ottoman rib features a newly developed multi-coloured filling yarn.

Let Baresque help you with an alternative. Call 1300 306 399 and we will be happy to select and send out some samples of newer options.

At order stage? Some stock of individual colours may still be available or be able to be to manufactured to order depending on quantity. Contact Baresque to chat through your options.

Select Colour Below To Request Sample*
Description / Features This casually elegant ottoman rib features a newly developed multi-coloured filling yarn.
Composition Polyester/olefin, acrylic/latex backing with mildew inhibitor
Finish: Teflon soil stain resistance.
Width 137cm
Roll Length 45.7m - Available by the lineal metre
Pattern Repeat N/A
Suggested Installation Non-reverse hang / trim selvedge and butt join. Douppioni can also be installed as overlap and double cut if preferred being sure that the cutting blade remains clean and sharp.
Baresque recommend and supply Roman brand adhesives and primers.
Lead Time 2 weeks (approx) from Wednesday subject to stock availability. + 1 week for Western Australia. Express delivery is available subject to a surcharge. Contact Baresque for details and pricing.
Fire Baresque (HYT)
Fire Rating In accordance with AS/NZS 3837 and AS 5637.1:2015
Classification - Group 2
Specific Extinction - Less than 250m²/kg

This product was deemed suitable for testing in accordance with AS 5637.1:2015 and testing was performed in accordance with AS/NZS 3837 for the purposes of Group Number Classification as specified in the NCC Volume One Specification C1.10 Clause 4.
Additional Comments Abrasion Resistance:
30,000+ Wyzenbeek cycles
Mildew, rot and bacteria resistant
Bleach cleanable - see Care Instructions for details
Care Instruction Always use a clean, soft, white cloth and always test cleaning in an inconspicuous area first.

For liquid stains, blot the stain or moisture till it no longer transfers to the cloth. By attending to liquid stains in a timely manner, the need for additional cleaning agents should be minimised or even eliminated.

For dry stains including mud, allow the stain to dry and crust. When the dry stain has hardened, break up the "crusted" area first before brushing. Remove all loose particles by brushing dry stains with a clean, soft bristled brush. A brush with white or clear, nylon or polypropylene bristles is recommended. Use both a side-to-side and up-and-down motion while brushing. Should any pilling or fuzzing appear on the face of the material after brushing, this can be easily removed by shaving the affected area with a razor.

If the stain persists, combine a small amount of warm water with the brushing technique descried above to first loosen the stain. Do not saturate the material.

If the stain still does not disappear after drying, try a solution of detergent and warm water, brushing in a circular motion from the outside of the stain toward the center to avoid further spreading. Rinse with warm water, blotting often with a clean, dry paper towel or soft cloth.

If none of these steps are successful, the stain may be oil based. Proceed to a commercial cleaning solvent or bleach to remove the stain. Apply using a paper towel or soft cloth, then brush with a circular motion from the outside of the stain in towards the center. Again, do not over saturate. Rinse with water and blot area dry. For tough stains, you may have to repeat this step for than once. It is most effective to use a small amount of solvent and repeat the process if necessary.

Always test in an inconspicuous area first. If care instructions don't deliver the expected results, cease cleaning method immediately and contact Baresque for assistance.
Product specification Download >
Baresque Wall Preparation and Wallcovering Installation Instructions Download >