Product Specifications
| Description | Fully refinishable resin with soft touch. | |
|---|---|---|
| Dimensions | Sheet Size 2440mm x 1220mm - 3mm, 6mm, 10mm, 15mm, 20mm, 30mm | |
| Composition | Resin | |
| Finishes | Gloss | |
| Environmental Info | Easily recycled. Contact your nearest Baresque branch for details. | |
| Lead Time | • 2-weeks (approx.) from Wednesday, subject to stock availability. • Additional 1-week for Western Australia. • Express delivery is available subject to a surcharge. Contact Baresque for details and pricing. | |
| Suggested Installation | An expansion gap of 1mm per 1 meter of product should be allowed for whne setting out your sheets. Adhere to substrate using either a neutral cure silicone or non-solvent based contact adhesive. DO NOT USE SOLVENT BASED CONTACT ADHESIVES. An expansion gap of 1mm per 1 meter of product should be allowed for when setting out your sheets. | |
| Fabrication Techniques | Standard wood-working tools. See Baresque Lucere Handling, Fabrication and Installation Guidelines. | |
| How to Specify | 1. Colour | |
| Care Instructions | Do not use glass cleaning products, acetone, gasoline, benzene, lacquer thinner, chlorinated solvents, gritty abrasive scouring compounds, or alkaline cleaners to clean Lucere as damage to the sheet will occur. Use warm water, mild detergent, and a soft sponge, cloth, or chamois to clean Lucere Surface contamination may be cleaned using kerosene, hexane, or aliphatic naphtha, or any acrylic cleaner, such as Novus. Always follow manufacturers recommended use and safety procedures Remove any oily residue left behind from solvent cleaning with detergent and water Do not use squeegee, scraper, or synthetic rags that may scratch. When cleaning, never scrub. Gently wipe surface with a soft scratch free cloth. Always test in an inconspicuous area first. If care instructions don't deliver the expected results, cease cleaning method immediately and contact Baresque for assistance. For refinishing, contact Baresque for details | |
| Customisable | Yes. 10 sheet minimum | |
| Additional Comments | If Lucere Board is being fabricated into drop down edges or carved into for signage, a 1mm PVC protective layer can be added to the back of the panel at an additional cost. |
